The through dovetail joint is the most popular dovetail joint because it is strong, attractive, and versatile. It is commonly used in furniture-making, cabinetry, and woodworking. The through dovetail joint is a traditional woodworking joint characterized by the interlocking triangular shape it creates.
Where are dovetails most commonly used?
A dovetail joint or simply dovetail is a joinery technique most commonly used in woodworking joinery (carpentry), including furniture, cabinets, log buildings, and traditional timber framing.
What is a standard dovetail?
Standard Size Dovetails. A standard size dovetail is as tall as your lumber is thick. This assumes you are joining boards of the same thickness with through-dovetails and that you intend to have them flush with the finished corner surfaces on both legs of the corner.
What is the difference between English dovetail and French dovetail?
English dovetails are the most common. They have interlocking joints and allow the most amount of space – usually several more inches of room than you would get with French dovetails. This is because the dovetail groove cannot be put all the way at the edge of a drawer with French dovetails.
What is an English dovetail joint?
English Dovetail / Through Dovetail The craftsperson usually orients the tails and pins in this joint horizontally, although this isn’t a cardinal rule. It is sometimes called a through dovetail because both the pins and tails go all the way through each-other.
What is the strongest joint in woodworking?
Mortise and tenon joints have stood the test of time for their remarkable strength. This traditional joint involves a projecting piece of wood, called a tenon, securely fitting into a corresponding cavity, a mortise. It can be reinforced with glue or wedges for stability for a stronger hold.
Are dovetail joints worth it?
Making sure that you pick a drawer joint that can withstand this type of wear and tear is crucial to the longevity of your kitchen cabinets. Dovetail joints are considered one of the strongest joints used in kitchen cabinetry construction and are the best solution for a kitchen cabinet drawer box.
Should you glue dovetail joints?
Michael Dresdner: The only areas that require glue on dovetails are the diagonal faces. All the diagonal faces are long grain, all the square faces are end grain, and all the flat faces abut end grain. Therefore, you need only apply glue to the diagonal faces on the tails or pins, or both.
What is a French dovetail joint?
Fyi, the English dovetail technique is also commonly referred to as a butt joint. French Dovetail: This technique is based on cutting out a slat in the middle of a board and also a corresponding piece of wood that can slide into the middle cutout. English and French Dovetail Drawer Construction.
How deep should a dovetail joint be?
With a 3⁄4″-diameter flush-trimming bit in your router, plow out the dado to 3⁄16″ deep. Next, take your router with a tem- plate guide and dovetail bit, set it to 9⁄16″ deep (without moving the straightedge) and make the cut into the case side. The cut should be a bit longer than the width of your front divider.
What are the disadvantages of a dovetail joint?
The disadvantages of dovetail joints are that they can be fairly difficult to mark out and cut, and if they are made badly these joints lose the advantages listed above. Depending on the project, function, and design, there are a number of different types of dovetail joints to choose from.
Is 11mm dovetail the same as 3 8?
However, that is not the only difference between the two dovetails. They also have different groove angles as shown below. The 11 mm dovetail has a 60-degree angle, while the 3/8” dovetail has a 45-degree angle.
What size dovetail should I use?
For drawers, boxes or trays 2″ or less I generally like a single dovetail. For 3″ to 3 1/2″ and less two dovetails, for 4″ three dovetails, for 5″ to 6″ four dovetails and for 6″ four or possibly five.
What is the best dovetail angle?
The ideal, he says, is 8.5° for softwoods and 7.5° when joining hardwoods. One Wednesday morning I laid out and cut a bunch of these dovetails. I ignored the really shallow angles (6.5° to 8.5°) because I wanted to adopt something more angular. The 10° dovetails looked OK.
What is stronger dovetail or finger joint?
Frid wrote that finger (or box) joints are stronger than through dovetails because the fingers offer much more glue surface.
How many types of dovetail joints are there?
The following are the different types of dovetail joints: Through dovetail. Half-blind dovetail. Secret mitered dovetail.
What type of joint is a dovetail?
Dovetail joints are known for their inherent strength and resistance to being pulled apart (tensile strength). A dovetail joint has a series of pins and tails in a trapezoidal shape and once glued a dovetail joint has no need for mechanical fasteners.
How many dovetail joints are there?
There are many different types of Dovetail Joint techniques used in woodworking such as, through dovetail joint, secret mitred dovetail joints, secret double-lapped dovetail joints, sliding dovetail joints, and half-blind dovetail joints. View more information about each type below.
What is the most common dovetail angle?
Lower (7° to 9°) angles are often advised for joining hardwoods, while higher angles (10° to 14°) are recommended for softwoods and even higher angles (14° to 18°) for half-blind dovetails.
What joint is often used for shelving?
A dado joint, also known as a housing joint, is a strong and easy-to-create type of woodworking joint popular in many forms of household applications such as shelving and bookshelves.
What is the weakest joint in carpentry?
The butt joint is the simplest joint. An unreinforced butt joint is also the weakest joint, as it provides a limited surface area for gluing and lacks any mechanical interlocking to resist external forces.
What is the weakest type of woodworking joint?
A butt joint is the most basic kind of wood joint where the end of one piece of material butts up to another without any shaping done to the material. Because this technique utilizes minimal surface area for glue, it’s generally considered a weak joint unless supported by additional fasteners such as nails and screws.
Which is the weakest carpentry joint type?
A butt joint uses a simple technique whereby two pieces of material are joined together at their ends, without any special shaping or cutting. Although it is simple, the butt joint is also the weakest of the wood joinery types.
When did they stop using dovetail?
According to oldcopper.org, coppersmiths kept on dovetailing the seams until about 1900, after which better joinery technology made the time-consuming dovetail process obsolete. This means that a dovetailed pot or pan could have been hand-cut or machine-cut.
Are dovetail joints difficult?
Hand-cutting a dovetail joint is kind of a woodworking high-wire act; one slip of the saw or chisel and the joint either won’t fit together or will look sloppy. It takes a lot of time to master the ability to cut dovetails quickly and well (by hand or machine), without a lot of fussing around.
Do you need to clamp dovetails?
I bang them together with a rubber mallet. I always make sure the side beieing assembled is down on the surface of the table to avoid splitting. In other words I’m hammering the pin board into the tail board not hammering the tail board onto the pin board. No need for clamps if you dovetails are tight.
