The following are the different types of dovetail joints: Through dovetail. Half-blind dovetail. Secret mitered dovetail.5 Types of Dovetail Joints
1) Through Dovetail Also known as plain dovetail, through dovetail is the easiest of the five dovetail types. …
2) Sliding Dovetail Sliding dovetails result from joining two wood pieces at the right angles. …
3) Half-blind Dovetail The purpose of this dovetail joint is to hide the end grain from the workpiece side. …
4) Secret Mitered (Full-blind Dovetail) …
5) Secret Double-lapped Dovetail …
What is a dovetail seam?
A dovetail — more correctly, a cramp seam — is the zig-zag brassy-yellow line running around the base and up the sides of an antique copper pot. The line marks where the coppersmith joined pieces of copper together to form the pot, something like how a dressmaker sews pieces of cloth together to make a dress.
What is the difference between English dovetail and French dovetail?
English dovetails are the most common. They have interlocking joints and allow the most amount of space – usually several more inches of room than you would get with French dovetails. This is because the dovetail groove cannot be put all the way at the edge of a drawer with French dovetails.
What is the most popular dovetail?
The through dovetail joint is the most popular dovetail joint because it is strong, attractive, and versatile. It is commonly used in furniture-making, cabinetry, and woodworking. The through dovetail joint is a traditional woodworking joint characterized by the interlocking triangular shape it creates.
What is the difference between a half-blind dovetail and a through dovetail?
The half-blind dovetail, also known as the single-lap dovetail, differs from the through dovetail because you can only see the end-grain from one side instead of both. Craftworkers use this joint if they do not want the end-grain visible from the front of the piece.
What are the different types of dovetail rails?
Dovetails come in several different types and sizes depending on manufacturer, but the most common are the 11 mm and 3⁄8 inch (9.5 mm). Some other less known, but currently commercially available dovetail mounts, are 12, 13, 13.5, 14, 14.5, 16, 16.5, 17 and 19 mm.
What is a Knapp joint?
When did they stop using dovetail joints?
So manufacturers moved away from dovetails. Hand-cut dovetailing was the default until 1860 when uniform machine-cut joints were introduced. But fine cabinetmakers persisted in fitting their joints by hand until the early 1900s, and cabinetmakers in Europe cut dovetails by hand well into the 1930s.
What is the best dovetail angle?
What is the strongest joint in woodworking?
Mortise and tenon joints have stood the test of time for their remarkable strength. This traditional joint involves a projecting piece of wood, called a tenon, securely fitting into a corresponding cavity, a mortise. It can be reinforced with glue or wedges for stability for a stronger hold.
Do dovetail joints need glue?
Michael Dresdner: The only areas that require glue on dovetails are the diagonal faces. All the diagonal faces are long grain, all the square faces are end grain, and all the flat faces abut end grain. Therefore, you need only apply glue to the diagonal faces on the tails or pins, or both.
Are dovetail joints difficult?
Hand-cutting a dovetail joint is kind of a woodworking high-wire act; one slip of the saw or chisel and the joint either won’t fit together or will look sloppy. It takes a lot of time to master the ability to cut dovetails quickly and well (by hand or machine), without a lot of fussing around.
What is a secret dovetail joint?
Secret Mitered Dovetail It offers the strength found in the dovetail joint but is totally hidden from both the inside and outside corners by forming the outer edge to meet at a 45-degree angle while hiding the dovetails internally within the joint.
What is an impossible dovetail joint?
Press a dovetailed board into another board with matching sockets, and you’ve created woodworking’s most iconic joint. The dovetails and sockets wedge the boards together, so the joint can’t pull apart; the only way to disassemble it is to lift the dovetailed board back out of the sockets.
What is a impossible dovetail?
Impossible dovetail joint puzzle is a rectangular block, composed of two different pieces, which are so fitted together that each side of the lower part appears to be dovetailed into the corresponding side of the upper part. For Fun. Craft fair ideas. Gift ideas. Simple, requires precision.
What are dovetail seams practical for?
Through Dovetail Here, two pieces of wood are joined together at their ends with a finger-like interlocking method which is seen from all outside surfaces. This method is used in everyday practice for joining the corners of frames, boxes, cabinets, and other items.
What is a dovetail joint and how is it used?
Dovetail joints are most commonly used woodworking. Carpenters use dovetail joints to create cabinets, furniture, drawers, log buildings, carcass construction, timber framing. Dovetail joints are known for their strength and durability.
What are the advantages of a dovetail joint?
Dovetails cut into the sides of a drawer will ensure that the front face of the drawer will not pull away. The interlocking dovetail joint has a large gluing area, further adding to its strength. Hand cut dovetail joints require precise handsaw and chisel skills, and can be fiddly to mark out and cut.
How do you identify a dovetail joint?
Dovetail joints often hold two boards together in a box or drawer, almost like interlocking the fingertips of your hands. As the dovetail joint evolved through the last one hundred thirty years, it becomes a clue for the age and authenticity of antique furniture.
How deep should a dovetail joint be?
Two-step Shouldered Joints With a 3⁄4″-diameter flush-trimming bit in your router, plow out the dado to 3⁄16″ deep. Next, take your router with a tem- plate guide and dovetail bit, set it to 9⁄16″ deep (without moving the straightedge) and make the cut into the case side.
What is a vixen style dovetail?
Are dovetail joints antique?
Most quality pieces of antique furniture will have a dovetail joint in the drawer construction as it was a very early form of construction, but was so successful, it was used for many 100’s of years. The Dovetail joint, got its name because of its similarity to the shape of a birds tail.
What is a sliding dovetail?
A sliding dovetail is a woodworking joint that allows two separate pieces to be slotted together without the need for glue or other fasteners. They are assembled by sliding the tail into the socket. Typically, sliding dovetail joints are used for shelf support or cabinet drawer construction.
What is a carcase joint?
Mainly used in the construction of drawers or cabinets, Box/Carcase Joints mainly appear in the corner and have several “teeth” to maximize thier strength by giving more surface area for the glue to bond.
What is the weakest wood joint?
A butt joint uses a simple technique whereby two pieces of material are joined together at their ends, without any special shaping or cutting. Although it is simple, the butt joint is also the weakest of the wood joinery types.
What is a rabbet joint used for?
Rabbet joints are commonly used for: joining sides of woodwork such as kitchen cabinetry and drawers. creating an inset in the back of a cabinet to hold the back panelling. forming the joints for the ends of shelving.
