Is dovetail a saw?

Although similar to a tenon saw, dovetail saws generally have thinner blades with a greater number of teeth per inch. Dovetail saws are primarily used for work that require small, very precise cuts, typically in joint making including dovetail and small tenon joints.

Is a dovetail saw a pull saw?

SUIZAN Japanese Hand Saw 9.5 Inch Dozuki Dovetail Pull Saw for Woodworking. JAPANESE STYLE PULL SAW: This product is a “Pull Saw.” Most people are used to European saws, called “push saws,” which cut through a pushing motion.

Is a dovetail saw a rip saw?

Back saws have a rigid brass or steel back and can be either rip or crosscut. Dovetail saws are back saws with a high tooth count, filed for ripping; tenon saws have a lower tooth count and are filed for crosscutting.

What is the difference between a dovetail saw and a tenon saw?

A tenon saw is 10″ or more and has 10 to 14 tooth points per inch and is typically set as a crosscut saw. A dovetail saw is usually 8″ long and has 18 to 22 tooth points per inch and usually set as a crosscut but may also be obtained as a rip tooth to give a smoother cut along the grain.

What is the difference between a back saw and a dovetail saw?

What type of cutting is a dovetail saw?

Is a dovetail saw a crosscut or rip?

When you’re dovetailing, most of the cutting is rip anyway, and even for others things finer rip teeth crosscut just fine. If you are worried then just create a knife line prior to sawing. Rip teeth can be used successfully for any crosscuts in your small joinery.

What is another name for a dovetail saw?

Backsaws: Larger backsaws are referred to as ‘tenon saws’ and the smaller backsaws are called ‘dovetail saws’. ‘Gents saws’ are similar to a dovetail saw, however they can be identified by their inline handle.

What is a dovetail saw good for?

I think that many people think that a dovetail saw is for cutting dovetails and though that is true, it is not so much a dedicated saw but simply a small saw we use mostly for cutting smaller joints and that includes dovetails.

Why is it called a dovetail saw?

The purpose of a dovetail saw is, as the name implies, to cut dovetails and other fine joints. Besides its small size, the distinguishing feature of the dovetail saw that separates it from other backsaws is the thickness of its blade, about . 018″ (26 gauge).

What is a gentleman’s saw?

The “Gentleman’s Saw” is a western type back saw. It was generally of a smaller size and features a simple turned handle. A Gent’s saw cuts on the push stroke and has a brass spine to keep the blade straight and stiff.

What is the difference between a gentleman’s saw and a dovetail saw?

On the other hand, the gent’s saw, also referred to as a gentleman’s saw, is a versatile yet smaller hand saw that’s well-suited for a variety of woodworking tasks. It typically has a broader blade compared to a dovetail saw, making it capable of straight or crosscuts in wood.

Should a tenon saw be rip or crosscut?

I would recommend getting a rip IF you could only have one for both types of cuts. I have both a 15tpi crosscut carcass and a 15tpi rip carcass. Despite the fact that the rip doubles as my dovetail saw, I still use the carcass way more. Crosscutting with a rip works fine, but will leave a less flattering surface.

What is the best length for a dovetail saw?

Why are you thinking of getting another dovetail saw? A 9″ saw for the kind of wood we generally work with (3/4″ or so) should be very adequate. [If your saw is not working well, perhaps it needs to be sharpened.]

What is another name for a dovetail saw?

Backsaws: Larger backsaws are referred to as ‘tenon saws’ and the smaller backsaws are called ‘dovetail saws’. ‘Gents saws’ are similar to a dovetail saw, however they can be identified by their inline handle.

What is a pull down saw called?

A chop saw, also called a cut-off saw or abrasive saw, is a portable saw with a circular blade that drops down and is designed to cut straight rather than curved lines. A chop saw is able to cut through a variety of materials.

Do Mitre saws push or pull?

A sliding miter saw should be pushed through the cut. Otherwise, you’ll make a climb cut, which can be dangerous.

Can you cut dovetails with a jigsaw?

If you have a jigsaw table, a few simple angle jigs can help you create fast, precise and repeatable dovetails.

Is a Japanese saw crosscut or rip?

The ryoba saw is prized by Japanese carpenters for its versatility, as it combines two specialised functions into one highly capable tool. Ryoba blades feature two teeth patterns on either edge of the blade — one set for cross-cutting across the grain of timber, and the other for rip-cutting with the grain.

Should you rip or crosscut saw first?

Rip sawing first will result in a smaller cut envelope for the subsequent crosscut saw operation. And since there are more cuts, more throughput will also be required during the crosscutting that follows. Crosscutting first means the cutting envelope will by necessity be larger on the crosscut saw.

What is a crosscut saw also known as?

A crosscut saw (thwart saw) is any saw designed for cutting wood perpendicular to (across) the wood grain. Crosscut saws may be small or large, with small teeth close together for fine work like woodworking or large for coarse work like log bucking, and can be a hand tool or power tool.

What does a dovetail look like?

There are two parts to a dovetail joint, pins and tails. The tails look like the tail of a dove (hence the name), and the pins are on the opposite board and fit in between the tails to create a joint that is impossible to pull apart in at least one direction.

Is dovetail worth it?

Making sure that you pick a drawer joint that can withstand this type of wear and tear is crucial to the longevity of your kitchen cabinets. Dovetail joints are considered one of the strongest joints used in kitchen cabinetry construction and are the best solution for a kitchen cabinet drawer box.

How do you hold a dovetail saw?

Tip #3: Grip the Dovetail Saw Properly The finger helps me control the lateral movement of the dovetail saw. I also make sure I don’t squeeze the saw handle very much. I tell my students to pretend they’re holding a baby chick: don’t squeeze hard, but also don’t let it fall out of your hand.

Is dovetail the highest quality?

Dovetail joinery is a benchmark of high-quality construction because these fasteners are all potential weak points that can degrade or break-down over time.

When did they stop using dovetail?

According to, coppersmiths kept on dovetailing the seams until about 1900, after which better joinery technology made the time-consuming dovetail process obsolete. This means that a dovetailed pot or pan could have been hand-cut or machine-cut.

Mike Walker

Repair and Construction Expert. Owner