They are still used, but nowadays more from tradition and a desire to show craftsmanship than anything else. The dovetail evolved as a way to keep box corner joints together using the poor boiled-hooves-and-hide glues then available. The shape of the joint provides some mechanical locking in the corner.Dovetail joints have been used for centuries, with some of the earliest examples dating back to ancient Egyptian times. They were used extensively in furniture making during the 18th and 19th centuries and are still used today in high-end woodworking.
When did they stop using dovetail joints?
By 1730, through dovetail joinery was abandoned in English furniture making in favor of the lapped construction. As furniture became more refined, furniture makers began to take pride in the construction of their drawers as well.
Are dovetail joints worth it?
Making sure that you pick a drawer joint that can withstand this type of wear and tear is crucial to the longevity of your kitchen cabinets. Dovetail joints are considered one of the strongest joints used in kitchen cabinetry construction and are the best solution for a kitchen cabinet drawer box.
What are the cons of a dovetail joint?
The disadvantages of dovetail joints are that they can be fairly difficult to mark out and cut, and if they are made badly these joints lose the advantages listed above. Depending on the project, function, and design, there are a number of different types of dovetail joints to choose from.
Where are dovetail joints commonly used?
A dovetail joint or simply dovetail is a joinery technique most commonly used in woodworking joinery (carpentry), including furniture, cabinets, log buildings, and traditional timber framing.
What are the cons of a dovetail joint?
The disadvantages of dovetail joints are that they can be fairly difficult to mark out and cut, and if they are made badly these joints lose the advantages listed above. Depending on the project, function, and design, there are a number of different types of dovetail joints to choose from.
Where are dovetail joints commonly used?
A dovetail joint or simply dovetail is a joinery technique most commonly used in woodworking joinery (carpentry), including furniture, cabinets, log buildings, and traditional timber framing.
What is the strongest joint in woodworking?
Mortise and tenon joints are widely regarded as one of the strongest and most reliable woodworking joints. They involve creating a mortise, or a hole, in one piece of wood and a tenon on the end of the other piece, which fits into the mortise.
What is stronger dovetail or finger joint?
Although the finger joint is not mechanically interlocking like a dovetail, the joint is amazingly strong. Today’s modern adhesives and the large glue surface make the finger joint equally as strong as the dovetail throughout the life of the adhesive.
Do dovetail joints need to be glued?
Michael Dresdner: The only areas that require glue on dovetails are the diagonal faces. All the diagonal faces are long grain, all the square faces are end grain, and all the flat faces abut end grain. Therefore, you need only apply glue to the diagonal faces on the tails or pins, or both.
What is the most popular dovetail joint?
Single-lap Dovetail The single-lap (known to many folks as a half-blind dovetail) is the best known of the dovetails since it’s used to join the front to the sides of a drawer.
Are dovetail joints permanent?
The strongest and most permanent right-angled joints made in wood are the ‘dove-tail’ joints, as illustrated below. The so-called tails and pins fit together to form a secure joint. Glue may be applied to the mating surfaces.
Is dovetail the highest quality?
Dovetail joinery is a benchmark of high-quality construction because these fasteners are all potential weak points that can degrade or break-down over time.
Are dovetail joints antique?
Most quality pieces of antique furniture will have a dovetail joint in the drawer construction as it was a very early form of construction, but was so successful, it was used for many 100’s of years. The Dovetail joint, got its name because of its similarity to the shape of a birds tail.
What is an English dovetail joint?
A dovetail joint is a locking joint. The English dovetail construction tends to allow for the largest possible drawer storage capacity. French dovetail construction is used for more elaborate features such a curved, bowed design.
What are dovetail seams practical for?
Dovetail joints (sometimes known in Europe as a swallowtail joint) are commonly used in carpentry, furniture, and more. This method connects two planes or pieces of wood by fitting together interlocking pieces (similar to a puzzle piece fit) which are shaped similarly to dovetails.
How do you date a dovetail joint?
You can get an idea of the date of a piece of antique furniture by looking at the dovetail joint, as if it is hand cut you know its pre 1880 and the more primitive the cut usually means an earlier piece. Below you can see examples, the first is a 17th century drawer, pre dovetail so very primitive clout nails used.
How can you tell if wood is antique furniture?
The best way to tell if it’s real wood is to look at the end grain. This is the surface of the wood that is exposed when a piece of wood is cut across the growth rings or layers of the tree. Real wood’s end grain looks distinctly different from that of manufactured wood.
How can you tell how old furniture is?
Search for any labels, stamps or manufacturing tags underneath or on the back of furniture, or in the drawers. These marks will be able to tell you who made the furniture, where it was manufactured and often the year that it was made. If there is a label, look for signs of ageing as they can be faked.
How do you date an old chest of drawers?
Saw marks can help you determine dates. Straight saw marks signify antique chest of drawers from the first half of the 18th century. From the end of the century, however, circular saws were used, leaving visible circular saw marks on the inside of carcases. Don’t completely be put off by restoration.
What are the cons of a dovetail joint?
The disadvantages of dovetail joints are that they can be fairly difficult to mark out and cut, and if they are made badly these joints lose the advantages listed above. Depending on the project, function, and design, there are a number of different types of dovetail joints to choose from.
Where are dovetail joints commonly used?
A dovetail joint or simply dovetail is a joinery technique most commonly used in woodworking joinery (carpentry), including furniture, cabinets, log buildings, and traditional timber framing.
What is the weakest joint in carpentry?
A butt joint uses a simple technique whereby two pieces of material are joined together at their ends, without any special shaping or cutting. Although it is simple, the butt joint is also the weakest of the wood joinery types.
What is the simplest joint in carpentry?
A butt joint is the easiest of all simple wood joints, but also is the weakest. The cut end of one board butts up against the edge of another piece at a right angle.
What is the best joint for joining timber end to end?
Expert Answer from Ellis Walentine: You can end-join boards in several ways. If structure were an issue, a scarf joint would be the best solution, but it’s relatively difficult to accomplish. In this case, you could use a glue-joint bit as you suggested or simply butt the pieces together with biscuits or a spline.
How hard is it to make a dovetail joint?
Of the four types of dovetail joints (through dovetail, half blind dovetail, secret mitered dovetail, and the sliding dovetail), the through dovetail is the most basic method, and a perfect one for hand cutting. Contrary to what seems to be popular belief on the internet, they are not really all that hard.
