Dovetail grooves are used to hold the O-ring in place during installation or maintenance. This groove design is relatively uncommon as it is expensive to machine and should not be used unless absolutely required. The dovetail groove construction is only recommended for O-rings with cross sections of .
Why use dovetail groove?
Dovetail grooves are used to hold the O-ring in-place on a face seal groove during during assembly and maintenance of equipment. An undercut or dovetail groove has proven beneficial in many applications to keep the o-ring in place.
What is a dovetail seal?
Many machines rely on gaskets to prevent leaks from occurring. Dovetail gaskets are used to seal two or more mating surfaces as well, but they are manufactured differently than other types of gaskets.
What are the different types of groove design?
The three main types of standard groove designs are Industrial Static, also called Radial, Industrial Reciprocating, also called Dynamic, and Face Seals also called Axial or Flange. Radial and Dynamic seals require the presence of a diametrical clearance gap for installation.
What are the different types of ring grooves?
A ring groove is a closely dimensioned groove cut into the face of a pipe flange. Together with a gasket, a groove helps create a seal between parts, so it is important that a groove meets designated specifications. API 6A ring grooves are divided into three ring types, BX, R, and RX.
Why use dovetail groove?
Dovetail grooves are used to hold the O-ring in-place on a face seal groove during during assembly and maintenance of equipment. An undercut or dovetail groove has proven beneficial in many applications to keep the o-ring in place.
What does a dovetail do?
What Is A Dovetail Joint? A dovetail joint is a joinery technique used in woodworking, traditionally used to join wooden furniture. Dovetail joints are known for their inherent strength and resistance to being pulled apart (tensile strength).
How is a dovetail used?
Dovetail joints, one of the strongest joints in carpentry, are woodworking seams that connect two pieces of wood by fitting them in with one another, similar to connecting two puzzle pieces. The end of one piece of wood is complementary to the other, creating an interlocking corner.
Why is it called dovetail?
Dovetail joints are made up of two parts called pins and tails. When a master craftsman wants to marry two boards together, they cut a series of pins on one board and matching tails on the other. They are trapezoidal in shape, resembling the tail feathers of a dove (hence the name dovetail).
What is the difference between tongue-and-groove and dovetail?
Dovetail joinery is a type of tongue-and-groove (or tail-and-pin) box joint. The tongue is a piece of the wood board that sticks out, and the groove is the space it fits into on the adjacent board. Tongue-and-groove joints are popular for making doors, flooring, and architectural paneling.
Is dovetail worth it?
In addition to their durability, dovetail drawers are also incredibly strong. The interlocking pins and tails create a sturdy structure that resists twisting and warping over time. This means that your drawers will continue to work smoothly for years to come, without any binding or sticking.
Why is it called groove?
A groove is an indentation or rut in something — like the grooves on an old record. Groove is rooted in an old Dutch word for “furrow” or “ditch.” And that’s just what a groove is: a carved out line, like wheel ruts in a muddy road or the narrow opening that a sliding door moves in.
What is the purpose of groove?
In manufacturing or mechanical engineering a groove is a long and narrow indentation built into a material, generally for the purpose of allowing another material or part to move within the groove and be guided by it. Examples include: A canal cut in a hard material, usually metal.
What is a groove also known as?
“Groove”, in terms of pattern-sequencing, is also known as “shuffle note”—where there is deviation from exact step positions.
What are the three ring grooves for?
Ring Grooves. Ring grooves are machined to specific tolerances, creating a three-sided machined surface. Ring lands are the two parallel surfaces of the ring groove which function as the sealing surface for the piston ring. Ring lands also function as the running surface for the side of the corresponding piston ring.
What is special about groove rings?
GrooveLife Rings are a silicone ring alternative to your traditional metal and diamond rings. They have basically a lifetime guarantee (94 years) & they will replace your ring if it breaks or even if you lose it! It also is the only silicone ring on the market that has grooves to allow your finger to breathe.
What are the advantages of dovetail nailing?
A dovetail joint is a strong joint. Dovetails cut into the sides of a drawer will ensure that the front face of the drawer will not pull away. The interlocking dovetail joint has a large gluing area, further adding to its strength.
What is the purpose of dovetailed nailing in timber?
Dovetail nailing grips both pieces of wood better than hammering the nails straight into the work. as the diagram shows, the nails are angled towards each other and this makes it a little more difficult for the two pieces of wood to be pulled apart.
Are dovetails necessary?
Making sure that you pick a drawer joint that can withstand this type of wear and tear is crucial to the longevity of your kitchen cabinets. Dovetail joints are considered one of the strongest joints used in kitchen cabinetry construction and are the best solution for a kitchen cabinet drawer box.
What is the difference between tongue and groove and dovetail?
Dovetail joinery is a type of tongue-and-groove (or tail-and-pin) box joint. The tongue is a piece of the wood board that sticks out, and the groove is the space it fits into on the adjacent board. Tongue-and-groove joints are popular for making doors, flooring, and architectural paneling.
Why use dovetail groove?
Dovetail grooves are used to hold the O-ring in-place on a face seal groove during during assembly and maintenance of equipment. An undercut or dovetail groove has proven beneficial in many applications to keep the o-ring in place.
What is an example of a dovetail?
A dovetail is a joint in woodworking where two sides are fitted together with interlocking pieces. You can also use the word dovetail to show how other things fit well together — like how your picnic plans nicely dovetail with the sunny forecast.
What does a dovetail look like?
There are two parts to a dovetail joint, pins and tails. The tails look like the tail of a dove (hence the name), and the pins are on the opposite board and fit in between the tails to create a joint that is impossible to pull apart in at least one direction.
What is a dovetail frame?
It gets its name from the shape of its mortise and tenon, which resemble the tail of a dove. Once the connection is made, it becomes very difficult to pull apart, because of its wedge shape. Dovetail Joint. Dovetail joints, in timber framing, are used to connect roof purlins to rafters, and floor joists to girts.
What are the advantages and disadvantages of a dovetail joint?
The interlocking dovetail joint has a large gluing area, further adding to its strength. Hand cut dovetail joints require precise handsaw and chisel skills, and can be fiddly to mark out and cut. If dovetail joints are poorly made they will lose the advantage of strength and durability.
What is an alternative to a dovetail joint?
Finger joints are an effective and striking alternative to traditional dovetail joinery. Although the finger joint is not mechanically interlocking like a dovetail, the joint is amazingly strong.
